Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version. Compare with Current ·  View Page History

These instructions help you configure your NEC SV8100 phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Connection Type
  TIM Plus establishes a TCP connection to this PBX.

Support Files
  NEC DXE.TDT
  NEC DXE.TDS
Required Tasks
  Configure the SMDR output
  Configure TIM Plus

Configuring the SMDR output

Below you will find instructions on how to configure the SMDR output on the NEC SV8100:

External equioment LAN setup:


SMDR otpions:


SMDR port assignment for trunk groups:


Trunk Basic setup


CD DP00 Network setup:


Configuring TIM Plus

Below you will find steps on how to configure TIM Plus to connect to your NEC SV8100 phone system:

  1. Log on to TIM Plus as usual and click on the Directory tab.
  2. Click on the site configured during the setup wizard and click Properties.

  3. Within the Site Properties window, select NEC DXE from the PBX model drop-down list.
  4. In the Connection method field, select Actively connect to PBX from the drop-down list.
  5. In the Host field, enter the IP Address of your NEC SV8100.
  6. In the Port field, enter the port 60010.
  7. Leave the Username and Password fields blank.
  8. In the Connection script field, select Generic Simple from the drop-down list.
  9. Finally, click on the Save button to apply the settings.

 

 

Labels: