These instructions help you configure your NEC SV8100 phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.
<a id="Configure the SMDR output"></a> |
Configuring the SMDR output
Below you will find instructions on how to configure the SMDR output on the NEC SV8100:
External equioment LAN setup:
SMDR otpions:
SMDR port assignment for trunk groups:
Trunk Basic setup
CD DP00 Network setup:
<a id="Configure TIM Plus"></a> |
Configuring TIM Plus
Below you will find steps on how to configure TIM Plus to connect to your NEC SV8100 phone system:
- Log on to TIM Plus as usual and click on the Directory tab.
- Click on the site configured during the setup wizard and click Properties.
- Within the Site Properties window, select NEC DXE from the PBX model drop-down list.
- In the Connection method field, select Actively connect to PBX from the drop-down list.
- In the Host field, enter the IP Address of your NEC SV8100.
- In the Port field, enter the port 60010.
- Leave the Username and Password fields blank.
- In the Connection script field, select Generic Simple from the drop-down list.
- Finally, click on the Save button to apply the settings.