HTML |
---|
<p>These instructions should assist in configuring your Mitel SX50 to
work with TIM Enterprise. If you are not familiar with PBX
configuration, please contact your system maintainer.</p>
<table class="confluenceTable">
<tbody>
<tr>
<th class="confluenceTh" width=158>Connection information</th>
<th class="confluenceTh">Description</th>
</tr>
<tr>
<td class="confluenceTd"><b>Connection type</b></td>
<td class="confluenceTd"><b>Serial Output: </b>
Mitel SX50 PBX sends SMDR information via a serial connection. You will need to directly connect a serial cable from the SX50 PBX to the PC that NetPBX is installed and running on.
</td>
</tr>
<tr>
<td class="confluenceTd"><b>Cable configuration</b></td>
<td class="confluenceTd">Straight-through.
</td>
</tr>
</tbody>
</table>
<h2>Configuring your SMDR</h2>
<p>By default the Mitel SX50 doesn't have SMDR enabled. To enable SMDR
for the Mitel SX50 you need to follow the steps below:
<ol>
<li>Access the programming interface.</li>
<li>Within the programming interface you need to access <span class="button no_margin">Systems Options Programming</span>.</li>
<li>Access Command 100, register 14.</li>
<li>You will be presented with four options. You need to enable <span class="keyword">Enabled for both incoming and outgoing trunk calls</span>.</li>
<li>Make sure that SMDR is enabled in all of your 'Class of Services (Command 121-129)' and trunk groups (Command 151-156).</li>
</ol>
<h2>Configuring TIM Enterprise</h2>
<p>Below you will find steps on how to configure TIM Enterprise to listen for SMDR data from your Mitel SX50:</p>
<ol>
<li>Browse to TIM Enterprise as normal and login with your credentials.</li>
<li>Click on the <span class="button no_margin">Directory</span> tab.</li>
<li>Go the the point in the Directory where you need to add the PBX Object and add a PBX with the name 'Mitel SX50'.</li>
<li>Left-click on it and select <span class="button no_margin">Properties</span>.</li>
<li>From the <span class="button no_margin">General</span> settings tab select <span class="keyword">Mitel SX50</span> from the PBX model list.</li>
<img class="screenshot border" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/pbx/mitel_sx50_1.png" alt="Mitel SX50" />
<li>In the <span class="button no_margin">Connection</span> tab select <span class="keyword">No connection required</span> from the <span class="reference">Connection method</span> list.</li>
<li>Finally, click on the <span class="button no_margin">Save</span> button.</li>
<img class="screenshot border" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/pbx/mitel_sx50_2.png" alt="Mitel SX50" />
</ol> |
These instructions help you configure your Mitel SX50 phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.
Pbxsummary |
---|
Supportfiles1 | Mitel SX50.TDT |
---|
Supportfiles2 | Mitel SX50.TDS |
---|
Requiredtask1 | Configure the SMDR output |
---|
Requiredtask3 | Install NetPBX |
---|
Requiredtask2 | Configure TIM Plus |
---|
Connection | Serial connection |
---|
RequiredTask1 | Configure the SMDR output |
---|
RequiredTask2 | Install NetPBX |
---|
RequiredTask3 | Configure TIM Plus |
---|
|
HTML |
---|
<a id="Configure the SMDR output"></a> |
Configuring your SMDR output
By default, the SMDR output of your Mitel is not enabled. To enable it, perform the steps below:
- Within the PBX programming interface choose Systems Options Programming.
- Access , .
Set the
Keywordmacro |
---|
Label | Enabled for both incoming and outgoing trunk calls |
---|
|
option.- Ensure SMDR is enabled in all of your Class of Services (Commands 121-129) and
Referencemacro |
---|
Label | Trunk Groups (Commands 151-156) |
---|
|
.
HTML |
---|
<a id="Install NetPBX"></a> |
Installing NetPBX
The Mitel SX50 phone system sends SMDR information via a serial connection. To collect the data from the serial port and send it to TIM Plus, you first need to install the netpbx software. For setup instructions, click on the link below:
Install and configure NetPBX
HTML |
---|
<a id="Configure TIM Plus"></a> |
Configuring TIM Plus
Once NetPBX is configured and collecting data, log in to TIM Plus and perform the following steps:
- Click on the Directory tab.
- Choose the site you want to configure and click Properties.
Screenshotmacro |
---|
Border | false |
---|
URL | /download/attachments/4817065/mitel_sx50_1.png |
---|
|
- In the Site Properties window, select Mitel SX50 from the PBX model drop-down list.
- In the Connection method field, select No connection required from the drop-down list.
- Click on the Save button to apply the settings.