Avaya IP Office up to v5

These instructions should assist in configuring your Avaya IP Office to work with TIM Plus. If you are not familiar with PBX configuration, please contact your system maintainer.

Configuring Avaya Delta Server

If you don't already have a copy of the Avaya Delta Server, you can get a copy from the Administration CD. If you don't have this, you will need to speak to your system installer/maintainer and they should be able to supply you with it.

The Avaya Delta Server is known to be backward compatible with older version of the Avaya IP Office as far as v3.x.

Please make sure the CCC Delta Server service is started, and follow the below instructions on how to configure the Avaya Delta Server:

1. Open your web browser and type in the following in to the address bar: http://127.0.0.1:8080.
2. Check that the Avaya Delta Server is connected to your Avaya IP Office. To do this, you need to look at the 'Comms Status', it should say 'Comms Restored'. If it doesn't then you need to click on the Comms link on the left-hand side, then click on the Search button and once it finds your Avaya IP Office unit select it from the Connection drop-down list and click on the Apply button. This should connect the Avaya Delta Server to the Avaya IP Office you selected.
3. Now click on the SMDR link on the left-hand side.
4. You will need to configure each of the fields on the SMDR screen as shown in the image below:

5. Now click on the apply button.

Configuring TIM Plus

Below you will find steps on how to configure TIM Plus to listen for SMDR data from your Avaya IP Office v5:

1. Browse to TIM Plus as normal and login with your credentials.
2. Click on the Directory tab.
3. Go the the point in the Directory where you need to add the PBX Object and add a PBX with the name 'Avaya IP Office v5'.
4. Left-click on it and select Properties.
5. From the General settings tab select Avaya IP Office from the PBX model list.

6. In the Connection tab select Listen for connection from PBX from the Connection method list.
7. In the Port field enter in 9000.
8. Finally, click on the Save button.