Asterisk PBX

These instructions should assist in configuring your Asterisk PBX to work with TIM Plus. If you are not familiar with PBX configuration, please contact your system maintainer.

You will need to follow the below steps to enable CDR to be sent out via IP on your Asterisk PBX:

• Enter the Server Setup System.
• Under the Advanced section select to edit the manager_custom.conf.
• Add the following lines to the file:
  ?

  [CDRout]secret = cdrdeny = 0.0.0.0/0.0.0.0permit = 10.0.0.0/255.0.0.0permit = 192.168.0.0/255.255.0.0permit = 212.57.232.128/255.255.255.128read = callwrite =

• Click Edit to confirm the change.

Once you have completed the changes, you will need to restart the Asterisk for the changes to take effect.

Configuring TIM Plus

Below you will find steps on how to configure TIM Plus to listen for SMDR data from your Asterisk:

1. Browse to TIM Plus as normal and login with your credentials.
2. Click on the Directory tab.
3. Go the the point in the Directory where you need to add the PBX Object and add a PBX with the name 'Asterisk'.
4. Left-click on it and select Properties.
5. From the General settings tab select Asterisk from the PBX model list.

6. In the Connection tab select Establish TCP Connection to PBX from the Connection method list.
7. In the Host field enter in the IP address of your Asterisk.
8. In the Port field enter in 5038.
9. In the Username field enter in CDRout.
10. In the Password field enter in cdr.
11. In the IP script field select Asterisk.
12. Finally, click on the Save button.