Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version. Compare with Current ·  View Page History

These instructions should assist in configuring your Asterisk based PBX to work with TIM Enterprise. If you are not familiar with PBX configuration, please contact your system maintainer.

Connection information Description
Connection type IP: You will need to follow the below steps to enable CDR to me sent out via IP on your Asterisk based PBX:
  • Enter the Server Setup System.
  • Under the Advanced section select to edit the manager_custom.conf.
  • Add the following lines to the file: [CDRout]secret = cdrdeny = 0.0.0.0/0.0.0.0permit = 10.0.0.0/255.0.0.0permit = 192.168.0.0/255.255.0.0permit = 212.57.232.128/255.255.255.128read = callwrite =.
  • Click Edit to confirm the change.
IP method TIM Enterprise makes a connection to the Asterisk PBX.

Once you have completed the changes, you will need to restart the Asterisk for the changes to take effect.

Configuring TIM Enterprise

Below you will find steps on how to configure TIM Enterprise to listen for SMDR data from your Siemens HiCom-HiPath:

  1. Browse to TIM Enterprise as normal and login with your credentials.
  2. Click on the Directory tab.
  3. Go the the point in the Directory where you need to add the PBX Object and add a PBX with the name 'Asterisk'.
  4. Left-click on it and select Properties.
  5. From the General settings tab select Asterisk from the PBX model list.
  6. Asterisk
  7. In the Connection tab select Establish TCP Connection to PBX from the Connection method list.
  8. In the Host field enter in the IP address of your Asterisk based PBX.
  9. In the Port field enter in 5038.
  10. In the Username field enter in CDRout.
  11. In the Password field enter in cdr.
  12. In the IP script field select Asterisk.
  13. Finally, click on the Save button.
  14. Asterisk
Labels: