Avaya Communications Manager

These instructions should assist in configuring your Avaya Communications Manager to work with TIM Enterprise. If you are not familiar with PBX configuration, please contact your system maintainer.

Connection information	Description
Connection type	IP: The Avaya Communication Manager requires a few changes on the system to get it to output the CDR via TCP/IP. You will find information on the required changes below.
IP Method	The Avaya Communications Manager sends the CDR data to the IP address of the TIM Enterprise machine on a specific TCP port.

Configuring your your Avaya Communications Manager

Configuring a node-names

You will need to use the change node-names command to add a new node. You will have two fields which are required to be populated:

• Name: In this field please enter in 'TIM Enterprise'.
• IP Address: This needs to be set to the IP Address of the machine that TIM Enterprise is installed on.

Below you can find an example of node-names configuration:

Configuring ip-services

If you are using firmware R13+ you will need to set the SMDR output to 'Flexible CIL' and configure the options as below:

Configuring system-parameters CDR

If you are using firmware R13+ you will need to set the SMDR output to 'Flexible CIL' and configure the options as below:

Configuring Trunk-Groups

If you are using firmware R13+ you will need to set the SMDR output to 'Flexible CIL' and configure the options as below:

Configuring Intra-Switch-CDR

If you are using firmware R13+ you will need to set the SMDR output to 'Flexible CIL' and configure the options as below:

Configuring multiple Avaya Communications Managers

If you are using firmware R13+ you will need to set the SMDR output to 'Flexible CIL' and configure the options as below:

Avaya Communications Manager - LSPs (Local Survivable Processors)

If you are using firmware R13+ you will need to set the SMDR output to 'Flexible CIL' and configure the options as below:

Avaya Communications Manager - Not linked

If you are using firmware R13+ you will need to set the SMDR output to 'Flexible CIL' and configure the options as below:

Configuring TIM Enterprise

Below you will find steps on how to configure TIM Enterprise to listen for SMDR data from your Avaya Communications Manager:

1. Browse to TIM Enterprise as normal and login with your credentials.
2. Click on the Directory tab.
3. Go the the point in the Directory where you need to add the PBX Object and add a PBX with the name 'Avaya Communications Manager'.
4. Left-click on it and select Properties.
5. From the General settings tab select Avaya Communications Manager from the PBX model list.

6. In the Connection tab select No connection required from the Connection method list.
7. Finally, click on the Save button.