You are viewing an old version of this page. View the current version.
Compare with Current ·
View Page History
These instructions should assist in configuring your Siemens HiCom-HiPath to work with TIM Enterprise. If you are not familiar with PBX configuration, please contact your system maintainer.
| Connection information | Description |
|---|---|
| Connection type | File |
| IP method | Swyx - File output:
The Swyx will output the CDR information to a file. TIM Enterprise can be installed on the same machine as the Swyx server, however we recommend that you speak to your system maintainer to see if there
would be any problems in doing this.
If you have to install TIM Enterprise on to another machine on the network, we advise that you setup a network share for the following directory: \program files\tri-line\tim enterprise\spool. You then need to map a network drive on the Swyx server machine to this path. |
For your SMDR configuration, you will need to speak to your system maintainer to enable SMDR output.
Configuring TIM Enterprise
Below you will find steps on how to configure TIM Enterprise to listen for SMDR data from your Siemens HiCom-HiPath:
- Browse to TIM Enterprise as normal and login with your credentials.
- Click on the tab.
- Go the the point in the Directory where you need to add the PBX Object and add a PBX with the name 'Siemens HiCom-HiPath'.
- Left-click on it and select .
- From the settings tab select Siemens HiCom-HiPath from the PBX model list.
- In the tab select Listen for connection from PBX from the Connection method list.
- In the Port field enter in 9000.
- Finally, click on the button.
Labels: