Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version. Compare with Current ·  View Page History

These instructions help you configure your Panasonic KX-TD Series phone system to work with TIM Enterprise. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Connection Type
  TIM Enterprise establishes a serial connection with this PBX.

Support Files
  Panasonic KX-TD Series.TDT
  Panasonic KX-TD Series.TDS
Required Tasks
  Configure the SMDR output
  Install NetPBX
  Confiure TIM Enterprise

Configuring your SMDR output

Follow the instructions below to configure your Panasonic KX-TD phone system to output SMDR data to TIM Enterprise. The configuration needs to be performed from a Digital Proprietary Telephone (DPT) such as the KX-T7431, KX-T7433, KX-T7436, KX-T7230, KX-T7235.

  1. Press the PROG + * + #  buttons simultaneously, then enter your system password.
  2. Enter programming mode 800 and press the Next button.
  3. Press the Select button to set the Outgoing option to All, then click on the Store button. Click Next.
  4. Press the Select button to set the Incoming option to All, then press the Store button.
  5. Press the End button to complete the configuration.

Installing NetPBX

The Panasonic KX-TD Series phone system sends SMDR information via a serial connection. To collect the call logging data from the serial port and send it to TIM Enterprise, you first need to install the NetPBX software. For setup instructions, click on the link below:

Install and configure NetPBX

Configuring TIM Enterprise

Once NetPBX is configured and collecting data, log in to TIM Enterprise and perform the following steps:

  1. Click on the Directory tab.
  2. Choose the PBX object you want to configure and click Properties.
  3. A new window will open. In the General tab, select Panasonic KX-TD Series from the Data format list and tick the Keep a local backup of data box, as shown below:

  4. In the Connection tab, select No connection required from the Connection method list.
  5. Click on the Save button to apply the settings.

 

Labels: