You are viewing an old version of this page. View the current version.
Compare with Current ·
View Page History
These instructions help you configure your Siemens Realitis/HiPath DX phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.
Connection Type
TIM Enterprise establishes a serial connection with this PBX.Support Files
Siemens HiPath DX.TDTSiemens HiPath DX.TDS
Required Tasks
Configure the SMDR outputInstall NetPBX
Configure TIM Enterprise
Configuring your CIL output
When configuring your Siemens Realitis/Hipath DX to send its CIL information via a serial connection, you need to directly connect a serial cable from the phone system's wall box to the PC running NetPBX .
Your system maintainer needs to enable CIL output by setting it to the Full or unrestricted CIL format.
Installing NetPBX
To collect call logging data from the serial port of your phone system and send it to TIM Plus, you first need to install the NetPBX software. For setup instructions, click on the link below:
Labels: