Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version. Compare with Current ·  View Page History

These instructions help you configure your Samsung iDCS phone system to work with TIM Enterprise. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Connection Type
  TIM Enterprise establishes a serial connection with this PBX.

Support Files
  Samsung DCS.TDT
  Samsung DCS.TDS
Required Tasks
  Configure the SMDR output
  Install NetPBX
  Configure TIM Enterprise

Configuring your SMDR output

Follow the instructions below to configure your Samsung iDCS to output SMDR data to TIM Enterprise.

  1. Log in to the Samsung Installation Tool software.
  2. Click on the 5. Features option from the left-hand menu.
  3. Click on the 5.6 System I/O Options tab and select 5.6.2. LAN Printer.
  4. In the LAN Printer options configure the entries in the SMDR column, as shown below:

  5. Click on the Save icon to save the settings.
  6. Click on the 5.6.3. SMDR Options tab and configure the following settings:

  7. Click on the Save icon at the top of the window to save the settings.

Configuring TIM Enterprise

Once NetPBX is configured and collecting data, log in to TIM Enterprise and perform the following steps:

  1. Click on the Directory tab.
  2. Choose the PBX object you want to configure and click Properties.
  3. A new window will open. In the General tab, select Samsung DCS from the Data format list and tick the Keep a local backup of data box, as shown below:

  4. In the Connection tab, select No connection required from the Connection method list.
  5. Click on the Save button to apply the settings.

 

 

 

Labels: