Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version. Compare with Current ·  View Page History

These instructions help you configure your Alcatel 4200-4400e phone system to work with TIM Enterprise. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Connection Type
  TIM Enterprise establishes a serial connection with this PBX.

Support Files
  Alcatel 4400E.TDT
Required Tasks
  Configure the SMDR output
  Download the interface file
  Install NetPBX
  Configure TIM Enterprise

Configuring your SMDR output

The Alcatel 4200-4400e phone system sends its call records via a serial connection. The most recent units already have a .v24 port but, for older units, you may need to purchase a .v24 module. Connect a serial cable between your Alcatel 4200-4400e .v24 module and the PC that NetPBX is installed and running on. See the table below for a summary of data output from Alcatel 4200-4400e:


Download the interface file

  1. Visit Tri-Line's Gateway and download the interface file, as shown below:

  2. Extract the Alcatel 4400E.ZIP file onto your computer's Desktop. This ZIP file contains the following file: Alcatel 4400E.TDT.
  3. Copy the file into the  C:\Program Files\Tri-Line\TIM Enterprise\config folder.

Installing NetPBX

Install and configure NetPBX

Configuring TIM Enterprise

Follow the steps below to configure TIM Enterprise to listen for SMDR data from your Alcatel 4200-4400e phone system:

  1. Click on the Directory tab.
  2. Choose the PBX object you want to configure and click Properties.
  3. A new window will open. In the General tab, select Alcatel 4400e from the Data format list and tick the Keep a local backup of data box, as shown below:

  4. In the Connection tab, select No connection required from the Connection method list.
  5. Click on the Save button to apply the settings.


 


 

Labels: