Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version. Compare with Current ·  View Page History

These instructions help you configure your Splicecom Maximiser phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Connection Type
  TIM Plus establishes a TCP connection to this PBX.

Support Files
  SpliceCom Maximiser.TDT
  SpliceCom Maximiser.TDS
Required Tasks
  Configure the SMDR output
  Configure TIM Plus

Configuring the SMDR output

By default, the call logging output of the Splicecom Maximiser is enabled and you do not normally require a password to obtain it.  To protect your call logging data, you can set a Call Logging Password in the System Details screen of your Maximiser's web management interface.  If you decide to set a password, you need to enter this when configuring TIM Plus (below).

Your system maintainer may have already set a call logging password for you.

Configuring TIM Plus

Follow the steps below to configure TIM Plus to collect call logging data from your Splicecom Maximiser:

  1. Click on the Directory tab.
  2. Choose the site you want to configure and click Properties.

  3. In the Site Properties window, select Splicecom Maximiser from the PBX model drop-down list.
  4. In the Connection method field, select Actively connect to PBX from the drop-down list.
  5. In the Host field, enter the IP address of your Splicecom Maximiser.
  6. In the Port field, enter 4001.
  7. Leave the Username field blank.
  8. If your Maximiser has a call logging password set, enter it in Password field; if not, leave it blank.
  9. In the Connection script field, select SpliceCom Maximiser from the drop-down list.
  10. Click on the Save button to apply the changes.

 

 

Labels: