Siemens HiCom/HiPath - IP connection

These instructions help you configure your Siemens HiCom/HiPath phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Connection Type

  TIM Plus listens for connections from this PBX.

Support Files

  Siemens HiCom-HiPath.TDT
  Siemens.TDS

Required Tasks

  Configure the SMDR output
  Configure TIM Plus

Configuring your SMDR output

The Siemens HiCom/HiPath doesn't have the SMDR output enabled by default. Please contact your phone maintainer to enable the data output for incoming, outgoing and internal calls.

Configuring TIM Plus

Once NetPBX is configured and collecting data, log on to TIM Plus as usual and apply the following settings:

1. Click on the Directory tab.
2. Select the site configured during the setup wizard and clickProperties.
   
   
3. Within the Site Properties window, select Siemens HiCom-HiPath from the PBX model drop-down list.
4. In the Connection method field select Listen for connections from PBX from the drop-down list.
5. Leave the Host field blank.
6. In the Port field enter in 9000.
7. Click on the Save button to apply the settings