Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version. Compare with Current ·  View Page History

These instructions help you configure your Siemens HiCom/HiPath phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Connection Type
  TIM Plus listens for connections from this PBX.

Support Files
  Siemens HiCom-HiPath.TDT
  Siemens.TDS
Required Tasks
  Configure the SMDR output
  Configure TIM Plus

Configuring your SMDR output

The Siemens HiCom/HiPath phone system sends SMDR information via a serial connection. You will need to directly connect a serial cable from the Siemens HiCom/HiPath phone system to the PC that NetPBX is installed and running on.

For more information about the output and configuration of your SMDR data, please contact your phone maintainer.

Configuring TIM Plus

Once NetPBX is configured and collecting data, log on to TIM Plus as usual and apply the following settings:

  1. Click on the Directory tab.
  2. Select the site configured during the setup wizard and clickProperties.

  3. Within the Site Properties window, select Siemens HiCom-HiPath from the PBX model drop-down list.
  4. In the Connection method field select Listen for connections from PBX from the drop-down list.
  5. Leave the Host field blank.
  6. In the Port field enter in 9000.
  7. Click on the Save button to apply the settings.
Labels: