You are viewing an old version of this page. View the current version.
Compare with Current ·
View Page History
These instructions help you configure your NEC DXE e phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.
Connection Type
TIM Plus establishes a serial connection with this PBX.
Support Files
NEC DXE.TDT
NEC DXE.TDS
Required Tasks
$paramRequiredTask1
Configure your SMDR output
The NEC DXE phone system sends SMDR information via a serial connection. You will need to directly connect a serial cable from the NEC DXE phone system to the PC that NetPBX software is installed and running on.
However, the NEC DXE doesn't have SMDR output enabled by defalut, so you will need to speak with your phone maintainer for more information about the output configuration.
These instructions should assist in configuring your NEC DXE to work with TIM Plus. If you are not familiar with PBX configuration, please contact your system maintainer.
| Connection information | Description |
|---|---|
| Connection type | Serial Output: NEC DXE PBX sends SMDR information via a serial connection. You will need to directly connect a serial cable from the NEC DXE PBX to the PC that NetPBX is installed and running on. |
| Cable configuration | Null modem/Crossover. |
By default the NEC DXE doesn't have SMDR enabled. You will need to speak to your system maintainer to get SMDR enabled.
Configuring TIM Plus
Below you will find steps on how to configure TIM Plus to listen for SMDR data from your NEC DXE:
- Browse to TIM Plus as normal and login with your credentials.
- Click on the tab.
- Click on the site configured during the setup wizard and click or create a new site and click .
- Within the Site Properties window, select NEC DXE from the PBX model drop-down list.
- In the Connection method field select No connection required from the drop-down list.
- Finally, click on the button.
