These instructions help you configure your NEC DXE phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.
Connection TypeTIM Plus establishes a serial connection with this PBX.
Support FilesNEC DXE.TDT
Required TasksConfigure the SMDR output
Configure TIM Plus
Configure your SMDR output
Configuring TIM Plus
Once NetPBX is configured and collecting data, log in to TIM Plus and perform the following steps:
- Click on the tab.
- Choose the site you want to configure and click
- In the Site Properties window, select NEC DXE from the PBX model drop-down list.
- In the Connection method field, select No connection required from the drop-down list.
- Click on the button to apply the changes.