You are viewing an old version of this page. View the current version.
Compare with Current ·
View Page History
These instructions should assist in configuring your NEC DXE to work with TIM Plus. If you are not familiar with PBX configuration, please contact your system maintainer.
| Connection information | Description |
|---|---|
| Connection type | Serial Output: NEC DXE PBX sends SMDR information via a serial connection. You will need to directly connect a serial cable from the NEC DXE PBX to the PC that NetPBX is installed and running on. |
| Cable configuration | Null modem/Crossover. |
By default the NEC DXE doesn't have SMDR enabled. You will need to speak to your system maintainer to get SMDR enabled.
Configuring TIM Plus
Below you will find steps on how to configure TIM Plus to listen for SMDR data from your NEC DXE:
- Browse to TIM Plus as normal and login with your credentials.
- Click on the tab.
- Click on the site configured during the setup wizard and click or create a new site and click .
- Within the Site Properties window, select NEC DXE from the PBX model drop-down list.
- In the Connection method field select No connection required from the drop-down list.
- Finally, click on the button.
Labels: