Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version. Compare with Current ·  View Page History

These instructions should assist in configuring your Iridiacom Telrad to work with TIM Plus. If you are not familiar with PBX configuration, please contact your system maintainer.

Connection information Description
Connection type Serial Output: The Iridiacom Telrad sends SMDR information via a serial connection. You will need to directly connect a serial cable from the Iridiacom Telrad PBX to the PC that NetPBX is installed and running on.
Cable configuration Null-modem/Crossover or Straight-through. Please check your Iridiacom Telrad manual.

For your SMDR configuration, you will need to speak to your system maintainer to enable SMDR output.

Configuring TIM Plus

Below you will find steps on how to configure TIM Plus to listen for SMDR data from your Iridiacom Telrad IS:

  1. Browse to TIM Plus as normal and login with your credentials.
  2. Click on the Directory tab.
  3. Click on the site configured during the setup wizard and click Propertiesor create a new site and click Properties.
  4. Iridiacom Telrad IS
  5. Within the Site Properties window, select Iridiacom Telrad IS from the PBX model drop-down list.
  6. In the Connection method field select No connection required from the drop-down list.
  7. Finally, click on the Save button.
Labels: