<p>These instructions should assist in configuring your Iridiacom Telrad to work with TIM Plus. If you are not familiar with PBX configuration, please contact your system maintainer.</p> <table class="confluenceTable"> <tbody> <tr> <th class="confluenceTh" width=158>Connection information</th> <th class="confluenceTh">Description</th> </tr> <tr> <td class="confluenceTd"><b>Connection type</b></td> <td class="confluenceTd"><b>Serial Output: </b> The Iridiacom Telrad sends SMDR information via a serial connection. You will need to directly connect a serial cable from the Iridiacom Telrad PBX to the PC that NetPBX is installed and running on. </td> </tr> <tr> <td class="confluenceTd"><b>Cable configuration</b></td> <td class="confluenceTd">Null-modem/Crossover or Straight-through. Please check your Iridiacom Telrad manual. </td> </tr> </tbody> </table> <p>For your SMDR configuration, you will need to speak to your system maintainer to enable SMDR output.</p> <h2>Configuring TIM Plus</h2> <p>Below you will find steps on how to configure TIM Plus to listen for SMDR data from your Iridiacom Telrad IS:</p> <ol> <li>Browse to TIM Plus as normal and login with your credentials.</li> <li>Click on the <span class="button no_margin">Directory</span> tab.</li> <li>Click on the site configured during the setup wizard and click <span class="button no_margin">Properties</span>or create a new site and click <span class="button no_margin">Properties</span>.</li> <img class="screenshot border" src="http://www.tri-line.com/common/img/documentation/tim_plus/pbx/iridiacom_telrad_1.png" alt="Iridiacom Telrad IS" /> <li>Within the <span class="reference">Site Properties</span> window, select <span class="keyword">Iridiacom Telrad IS</span> from the <span class="reference">PBX model</span> drop-down list.</li> <li>In the <span class="reference">Connection method</span> field select <span class="keyword">No connection required</span> from the drop-down list.</li> <li>Finally, click on the <span class="button no_margin">Save</span> button.</li> </ol> |