Unify (Siemens) HiCom-HiPath (3000) - IP connection

...

<a id="Configure the SMDR output"></a>

Configuring your SMDR output

The Siemens HiCom/HiPath phone system sends SMDR information via a serial connection. You will need to directly connect a serial cable from the Siemens By default, the SMDR output of a Siemens HiCom/HiPath phone system to the PC that NetPBX is installed and running on.For more information about the output and configuration of your SMDR data, please contact your phone maintaineris not enabled. Contact your system maintainer to enable it for incoming, outgoing and internal calls.

<a id="Configure TIM Plus"></a>

Configuring TIM Plus

Once NetPBX is configured and collecting data, log on in to TIM Plus as usual and apply perform the following settingssteps below:

1. Click on the Directory tab.
2. Select Choose the site configured during the setup wizard you want to configure and clickProperties.
   

   Screenshotmacro
   Border false URL http://docs.tri-line.com:8090/download/attachments/12583460/siemens_hicom_hipath_1.png

3. Within In the Site Properties window, select Siemens HiCom-HiPath from the PBX model drop-down list.
4. In the Connection method field, select Listen for connections from PBX from the drop-down list.
5. Leave the Host field blank.
6. In the Port field, enter in 9000.
7. Click on the Save button to apply the settings.