These instructions help you configure your Cisco UCME / BE4000 / UC500 to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.
| Pbxsummary |
|---|
| Supportfiles1 | Cisco UCME - SysLog.TDT |
|---|
| Supportfiles2 | Cisco UCME - SysLog.TDS |
|---|
| Connection | SysLog connection |
|---|
| RequiredTask1 | Configure Cisco AXL sync |
|---|
| RequiredTask2 | Configure UCME to send SysLog events |
|---|
| RequiredTask2RequiredTask3 | Configure TIM Plus to capture SysLog packets |
|---|
|
| HTML |
|---|
<a id="Configure Cisco AXL sync |
...
Configuring Cisco AXL sync
Follow the steps below to configure TIM Plus to perform directory synchronisation with your Cisco UCME:
- Click on the Directory tab.
- Choose the site you want to configure and click Properties.
- In the Site Properties window, select the Sync tab.
- Tick the option entitled Synchronise with the following device .
| Screenshotmacro |
|---|
| Border | false |
|---|
| URL | /download/attachments/12158183/cisco_ucme_3.png |
|---|
|
- In the Host field, enter the IP address of your UCME.
- In the field, enter the port number of the IOS service, e.g. .
- In the Username field, enter the username of the IOS login that can perform synchronisation.
- Click on the Set button and enter the password of the IOS login that can perform synchronisation.
- Click on the Save button to apply the changes.
| HTML |
|---|
<a id="Configure UCME to send SysLog events"></a> |
Configuring UCME to send SysLog events
Log in to your phone system via Telnet, using Use Telnet to connect to the IP address of your Cisco UCME / UC500, as shown below:
| Screenshotmacro |
|---|
| Border | false |
|---|
| Shadow | false |
|---|
| URL | http://docs.tri-line.com:8090/download/attachments/12158183/cisco_ucme_4.png |
|---|
|
Once connected, enter the following commands to enable the Cisco UCME / UC500 to send SysLog events to TIM Plus:
| Step | IOS commands | Description |
|---|
| 1 | enable | Enter Causes the UCME to enter EXEC mode, enter . Type your EXEC password if requested. |
| 2 | conf t | Enter Enters the global configuration mode. |
| 3 | aaa new-model | Enable Enables aaa accounting mode. |
| aaa accounting connection h323 start-stop group SysLog |
| gw-accounting syslog |
| acct-template callhistory-detail |
| 4 | logging 192.168.10.1 | Specifies the IP address to send CDR data. Where 'of TIM Plus's SysLog server, to which CDR data will be sent, e.g. 192.168.10.1' is the machine running TIM Plus. |
| 5 | end | Exit Exits configuration mode. |
| 6 | wr | Save Saves changes. |
| HTML |
|---|
<a id="Configure Cisco AXL sync"></a> |
Configuring Cisco AXL sync
Below you will find steps on how to configure the Directory Sync from Cisco UCM:
...
...
| Screenshotmacro |
|---|
| Border | false |
|---|
| URL | http://docs.tri-line.com:8090/download/attachments/12158183/cisco_ucme_3.png |
|---|
|
...
| HTML |
|---|
<a id="Configure TIM Plus to capture SysLog packets"></a> |
Configuring TIM Plus to capture SysLog packets
Below you will find steps on how Follow the steps below to configure TIM Plus to receive SysLog data from your Cisco UCMUCME:
- Browse to TIM Plus as normal and login with your credentials.
- Click on the Directory tab.
- Select Choose the site configured during the setup wizard you want to configure and click Properties.
| Screenshotmacro |
|---|
| Border | false |
|---|
| URL | http://docs.tri-line.com:8090/download/attachments/12158185/cisco_ucme_6.png |
|---|
|
- Within In the Site Properties window, select Cisco UCME - SysLog from the PBX model drop-down list.
- In the Connection method field, select SysLog connection from the drop-down list.
- In the Client IP field, enter in the IP Address address of the Cisco UCME / UC500.
- Finally, click Click on the Save button to apply the settings.