...
Configuring UCME to send SysLog events
Log in to your phone system via Telnet, using Use Telnet to connect to the IP address of your Cisco UCME / UC500, as shown below:
| Screenshotmacro | ||||||
|---|---|---|---|---|---|---|
|
Once connected, enter the following commands to enable the Cisco UCME / UC500 to send SysLog events to TIM Plus:
| Step | IOS commands | Description |
|---|---|---|
| 1 | enable | Enter Causes the UCME to enter EXEC mode, enter . Type your EXEC password if requested. |
| 2 | conf t | Enter Enters the global configuration mode. |
| 3 | aaa new-model | Enable Enables aaa accounting mode. |
| aaa accounting connection h323 start-stop group SysLog | ||
| gw-accounting syslog | ||
| acct-template callhistory-detail | ||
| 4 | logging 192.168.0.1 | Specifies the IP address to send CDR data. Where 'of TIM Plus's SysLog server, to which CDR data will be sent, e.g. 192.168.10.1' is the machine running TIM Plus. |
| 5 | end | Exit Exits configuration mode. |
| 6 | wr | Save Saves changes. |
| HTML |
|---|
<a id="Configure Cisco AXL sync"></a> |
Configuring Cisco AXL sync
Below you will find steps on how to configure the Directory Sync from Cisco UCM:
...
Follow the steps below to configure TIM Plus to perform directory synchronisation with your Cisco UCM:
- Click on the tab.
- Choose the site you want to configure and click .
- In the Site Properties window, select the tab.
- Tick the option entitled Synchronise with the following device .
Screenshotmacro Border false URL http://docs.tri-line.com:8090/download/attachments/12158183/cisco_ucme_3.png - In the the Host field field, enter the IP address of your UCME / UC500.
- In the
field, enter the Username fieldport number of the IOS service, e.g.Referencemacro Label Port
.Keywordmacro Label 23 - In the Username field, enter the username used to log in to your UCME / UC500of the IOS login that can perform synchronisation.
- Click on the the button button and enter the password used to log in to the UCME / UC500of the IOS login that can perform synchronisation.
- Click on the the button button to apply the settingschanges.
| HTML |
|---|
<a id="Configure TIM Plus to capture SysLog packets"></a> |
...