Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version. Compare with Current ·  View Page History

Each report has its own set of parameters, specific to the nature of each one. However, many are common between all reports.

The parameters for each report are now summarised over the next few pages for your convenience.

COMMON PARAMETERS
Parameter * Description Default value
period * Report period
fromdate * From date
todate * To date
fromtime From time
totime To time
name Report title
width Width of results table (% is provided) 100
site Site to report on Blank implies all sites
CUSTOM REPORT (1)
Parameter Description Default value
type Specifies call type from:
'outgoing' or 'all outgoing calls'
'outgoingx' or 'outgoing transfers'
'incoming' or 'all incoming calls'
'answered' or 'answered calls'
'answeredx' or 'answered transfers'
'abandoned' or 'abandoned calls'
'abandonedx' or 'abandoned transfers'
'internal' or 'internal calls'
'feature' or 'pbx feature calls'
Blank implies all call types
fromdurn Duration range start
todurn Duration range end
fromresponse Response time range start
toresponse Response time range end
extension Extension number
fromextn Extension number range start
toextn Extension number range end
extname Extension name
extngroup Extension group
trunk Trunk number
fromtrunk Trunk number range start
totrunk Trunk number range end
trunkname Trunk name
trunkgroup Trunk group
account Account code match (* is provided)
cli Caller ID match (* is provided)
accesscode Specifies a trunk access code (eg. 9)
lcr Specifies a Least Cost Route sequence
diallednumber Dialled number match (* is provided)
destination Location name match (* is provided)
tariff Tariff name match (* is provided)
fromcost Cost range start
tocost Cost range end
orderby Specifies field to order result by, from: 'site', 'datetime', 'date', 'time', 'type', 'duration', 'response', 'dayminute', 'dayhalfhour', 'extension', 'extensionname', 'extensiongroup', 'trunk', 'trunkname', 'trunkgroup', 'account', 'cli', 'accesscode', 'lcr', 'diallednumber', 'destination', 'tariff', or 'cost'
sort Specifies direction of sort 'up' or 'down' where 'up' specifies ascending, etc 'up'
BILLING REPORT (2)
Parameter * Description Default value
extngroup * Extension Group name
extension * Extension number
accountcode * Account code
markup * Markup per call (% is provided) 0
surcharge * Surcharge per call (no currency symbol) 0

* Indicates a mandatory field.

 

 

 

Labels: