Toshiba CIX/CTX

These instructions should assist in configuring your Toshiba CIX/CTX to work with TIM Enterprise. If you are not familiar with PBX configuration, please contact your system maintainer.

Connection information	Description
Connection type	Serial Output or IP: If you have configured your Toshiba CIX/CTX to send SMDR information via a serial connection, you will need to directly connect a serial cable from the Toshiba CIX/CTX PBX to the PC that NetPBX is installed and running on.
Cable configuration	Null-modem/Crossover or Straight-through. Please check your Toshiba manual.
IP method	TCP/IP connection: If the Toshiba CIX/CTX is configured to send the SMDR information via TCP/IP the actual installation of TIM Enterprise can be anywhere on the network that the PBX is connected to. The Toshiba CIX/CTX will need to be configured to send the SMDR data to the IP address and TCP port that TIM Enterprise is listening on.

For your SMDR configuration, you will need to speak to your system maintainer to enable SMDR output.

Configuring TIM Enterprise

Below you will find steps on how to configure TIM Enterprise to listen for SMDR data from your Toshiba CIX/CTX:

Browse to TIM Enterprise as normal and login with your credentials.
Click on the Directory tab.
Go the the point in the Directory where you need to add the PBX Object and add a PBX with the name 'Toshiba CIX/CTX'.
Left-click on it and select Properties.
From the General settings tab select Toshiba CIX/CTX from the PBX model list.

In the Connection tab select Listen for connection from PBX from the Connection method list.
In the Port field enter in 9000.
Finally, click on the Save button.