Mitel Imagination

These instructions should assist in configuring your Mitel Imagination to work with TIM Enterprise. If you are not familiar with PBX configuration, please contact your system maintainer.

Connection information	Description
Connection type	Serial Output: Mitel Imagination PBX sends SMDR information via a serial connection. You will need to directly connect a serial cable from the Mitel Imagination PBX to the PC that NetPBX is installed and running on.
Cable configuration	Null-mode/Crossover or Straight-through. Please check your Mitel Imagination manual.

Configuring TIM Enterprise

Below you will find steps on how to configure TIM Enterprise to listen for SMDR data from your Mitel Imagination:

Browse to TIM Enterprise as normal and login with your credentials.
Click on the Directory tab.
Go the the point in the Directory where you need to add the PBX Object and add a PBX with the name 'Mitel Imagination'.
Left-click on it and select Properties.
From the General settings tab select Mitel Imagination from the PBX model list.

In the Connection tab select No connection required from the Connection method list.
Finally, click on the Save button.