GEC BTEX

These instructions should assist in configuring your GEC BTEX PBX to work with TIM Plus. If you are not familiar with PBX configuration, please contact your system maintainer.

Connection information	Description
Connection type	Serial Output: GEC BTEX PBX sends SMDR information via a serial connection. You will need to directly connect a serial cable from the GEC BTEX PBX to the PC that NetPBX is installed and running on.
Cable configuration	Null-modem/Crossover or Straight-through. Please check your GEC BTEX manual.

For your SMDR configuration, please note that GEC BTEX has multiple output formats. For TIM Plus, the output will need to be configured to the 600S format.

Configuring TIM Plus

Below you will find steps on how to configure TIM Plus to listen for SMDR data from your GEC BTEX 600S:

Browse to TIM Plus as normal and login with your credentials.
Click on the Directory tab.
Click on the site configured during the setup wizard and click Propertiesor create a new site and click Properties.

Within the Site Properties window, select Aastra BP from the PBX model drop-down list.
In the Connection method field select No connection required from the drop-down list.
Finally, click on the Save button.