Alcatel OmniPCX Enterprise

These instructions should assist in configuring your Alcatel OmniPCX Enterprise to work with TIM Enterprise. If you are not familiar with PBX configuration, please contact your system maintainer.

Configuring your SMDR

Below you will find instructions from the Alcatel OmniPCX Enterprise manual on how to configure the SMDR output via serial or TCP/IP. These instructions are taken from the Alcatel OmniPCX Enterprise manual:

Connect to your PBX via telnet and follow the steps below:

1. Applications (Enter)
2. Accounting (Enter)
3. Review/Modify (Enter)
4. All Instance (F1)
5. Realtime ticket Output: Set this to ethernet. Note that if you don't have appropriate license, you can only select V24 (serial) here.
6. Save changes and exit

The table below presents a summary of data output from Alcatel:

Configuring TIM Enterprise

Below you will find steps on how to configure TIM Enterprise to listen for SMDR data from your Alcatel OmniPCX Enterprise:

1. Browse to TIM Enterprise as normal and login with your credentials.
2. Click on the Directory tab.
3. Go the the point in the Directory where you need to add the PBX Object and add a PBX with the name 'Alcatel OmniPCX Enterprise'.
4. Left-click on it and select Properties.
5. From the General settings tab select Alcatel OmniPCX Enterprise from the PBX model list.

6. In the Connection tab select Establish TCP connection to PBX from the Connection method list.
7. In the Host field enter the IP Address of your Alcatel OmniPCX Enterprise.
8. In the Port field enter in 2533.
9. Leave the Username and Password fields blank.
10. In the IP script field select Alcatel OmniPCX Enterprise from the drop-down list.
11. Finally, click on the Save button.