Configuring a Site

To configure the Site's properties, simply select it and click on the Properties button, at the top right-hand side of the Sites panel, as shown below:

The following configuration screen will appear:

General PBX properties

All options are described in more detail in the table below:

Field	Description
Name	Simply type the name by which which you would like to identity the site. If there is just one site but more than one telephone system connected, enter the name by which you would like to identify the telephone system here.
PBX model	Select the PBX/telephone system you are connecting from the drop-down list provided. Please note that if you added your PBX/Switch when requesting the download, the appropriate interface file (TDT) will have already been provided.
Connection method	Select the method by which you are connecting to the PBX/telephone system from the drop-down list provided.
Host	Type in the IP address of the system you are connecting to. For a listening connection, this is typically left blank although it can be configured to restrict incoming data from a specific IP address.
Port	Enter to port number that the data will be received here.
Username	If a username is required, enter the username here.
Password	If a password is required, enter the password here.
Connection script	Where a connection script is required, you may select from the drop-down list provided.
DSN name	Enter the DSN name here.
Frequency	Enter the connection frequency here i.e. how often it polls the DSN connection.
DB Script	Enter the DB script here. If you are unaware of the DB script required for your particular PBX/Switch, e-mail us at [email protected] and we will provide.