Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version. Compare with Current ·  View Page History

These instructions should assist in configuring your VoiSpeed to work with TIM Enterprise. If you are not familiar with PBX configuration, please contact your system maintainer.

Connection information Description
Connection type File
IP method VoiSpeed - File output: The VoiSpeed will output the CDR information to a file. TIM Enterprise can be installed on the same machine as the VoiSpeed server, however we recommend that you speak to your system maintainer to see if there would be any problems in doing this.

You will need to install a copy of Tri-Line's IP PBX as the output file from the VoiSpeed is read only.

For your SMDR configuration, you will need to speak to your system maintainer to enable SMDR output.

Configuring TIM Enterprise

Below you will find steps on how to configure TIM Enterprise to listen for SMDR data from your VoiSpeed:

  1. Browse to TIM Enterprise as normal and login with your credentials.
  2. Click on the Directory tab.
  3. Go the the point in the Directory where you need to add the PBX Object and add a PBX with the name 'VoiSpeed'.
  4. Left-click on it and select Properties.
  5. From the General settings tab select VoiSpeed from the PBX model list.
  6. VoiSpeed
  7. In the Connection tab select No connection required from the Connection method list.
  8. Finally, click on the Save button.
  9. VoiSpeed
Labels: