Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version. Compare with Current ·  View Page History

These instructions should assist in configuring your LG iPECS to work with TIM Enterprise. If you are not familiar with PBX configuration, please contact your system maintainer.

Connection information Description
Connection type Serial Output or IP: If you have configured the LG iPECS to send the SMDR information via a serial connection, you will need to directly connect a serial cable from the LG iPECS to the PC that NetPBX is installed and running on.
Cable configuration Null-modem/Crossover.
IP method If the LG iPECS is configured to send the SMDR information via TCP/IP, the actual installation of TIM Enterprise can be anywhere on the network that the PBX is connected to. The LG iPECS will need to be configured to output SMDR data via TCP/IP so TIM Plus can connect to it. TIM Enterprise will connect to the LG iPECS on TCP port 23.

Configuring your SMDR

The LG iPECS by default has SMDR output disabled. Below you will find the programming number codes and the fields that need to be configured.

PGM 177: SMDR Attributes

Within this window you need set Info/On-line SMDR to Telnet 1. This will allow TIM Plus to connect to the LG iPECS on TCP port 23 to receive SMDR data.

Below is an example SMDR Attributes window:

LG iPECS

PGM 175: Printer Port Selection

Below is an example Programming Port Selection window:

LG iPECS

Configuring TIM Enterprise

Below you will find steps on how to configure TIM Enterprise to listen for SMDR data from your LG iPECS:

  1. Browse to TIM Enterprise as normal and login with your credentials.
  2. Click on the Directory tab.
  3. Go the the point in the Directory where you need to add the PBX Object and add a PBX with the name 'LG iPECS'.
  4. Left-click on it and select Properties.
  5. From the General settings tab select LG iPECS from the PBX model list.
  6. LG iPECS
  7. In the Connection tab select Establish TCP connection to PBX from the Connection method list.
  8. In the Host field enter the IP Address of your LG iPECS.
  9. Leave Port field blank.
  10. Leave the Username field blank but enter the Password.
  11. In the IP script field select Generic Simple from the drop-down list.
  12. Finally, click on the Save button.
  13. LG iPECS
Labels: