You are viewing an old version of this page. View the current version.
Compare with Current ·
View Page History
These instructions should assist in configuring your NEC NEAX to work with TIM Enterprise. If you are not familiar with PBX configuration, please contact your system maintainer.
| Connection information | Description |
|---|---|
| Connection type | Serial Output or IP: If you have configured the NEC NEAX to send the SMDR information via a serial connection, you will need to directly connect a serial cable from the NEC NEAX to the PC that NetPBX is installed and running on. If the NEC NEAX is configured to send the SMDR information via TCP/IP, the actual installation of TIM Enterprise can be anywhere on the network that the PBX is connected to. The NEC NEAX will need to be configured to output SMDR data via TCP/IP so TIM Enterprise can connect to it. TIM Enterprise will connect to the NEC NEAX on TCP port 2599. |
| Cable configuration | Null-mode/Crossover or Straight-through. Please check your NEC NEAX manual. |
| IP method | TIM Enterprise will connect to the IP address of your NEC NEAX on a specific TCP port. |
You will need to speak to your system maintainer to enable the SMDR output.
Configuring your Serial connection
Using the CAT (Customer Administration Terminal) in the system-programming mode, enter the following settings:
| Field name | Details |
|---|---|
| CM40 | Output port & attributes Defaults: 9600 baud, 8 data bits, no parity, 2 stop bits, DTR/RTS flow control. |
| CM13+05 | Null-mode/Crossover or Straight-through. Please check your NEC NEAX manual. |
| CM13+06 | TIM Enterprise will connect to the IP address of your NEC NEAX on a specific TCP port. |
| CM35+14 | Null-mode/Crossover or Straight-through. Please check your NEC NEAX manual. |
| CM35+49 | TIM Enterprise will connect to the IP address of your NEC NEAX on a specific TCP port. |
| CM08 | TIM Enterprise will connect to the IP address of your NEC NEAX on a specific TCP port. |
Configuring TIM Enterprise
Below you will find steps on how to configure TIM Enterprise to listen for SMDR data from your Aastra BP:
- Browse to TIM Enterprise as normal and login with your credentials.
- Click on the tab.
- Go the the point in the Directory where you need to add the PBX Object and add a PBX with the name 'Aastra BP'.
- Left-click on it and select .
- From the settings tab select Aastra BP from the PBX model list.
- In the tab select No connection required from the Connection method list.
- Finally, click on the button.
Labels: