Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version. Compare with Current ·  View Page History

These instructions should assist in configuring your Aastra MX-ONE to work with TIM Enterprise. If you are not familiar with PBX configuration, please contact your system maintainer.

Connection information Description
Connection type Serial Output or IP: If the Siemens HiCom-HiPath is configured to send SMDR information via a serial connection, you will need to directly connect a serial cable from the Siemens HiCom-HiPath PBX to the PC that NetPBX is installed and running on.
Cable configuration Straight-through.
IP method TCP/IP connection: If the Siemens HiCom-HiPath is configured to send the SMDR information via TCP/IP the actual installation of TIM Enterprise can be anywhere on the network that the PBX is connected to. The Siemens HiCom-HiPath will need to be configured to send the SMDR data to the IP address and TCP port that TIM Enterprise is listening on.

For your SMDR configuration, you will need to speak to your system maintainer to enable SMDR output.

Configuring TIM Enterprise

Below you will find steps on how to configure TIM Enterprise to listen for SMDR data from your Aastra MX-ONE:

  1. Browse to TIM Enterprise as normal and login with your credentials.
  2. Click on the Directory tab.
  3. Go the the point in the Directory where you need to add the PBX Object and add a PBX with the name 'Aastra MX-ONE'.
  4. Left-click on it and select Properties.
  5. From the General settings tab select Aastra MX-ONE from the PBX model list.
  6. Aastra MX-ONE
  7. In the Connection tab select Listen for connection from PBX from the Connection method list.
  8. Finally, click on the Save button.
  9. Aastra MX-ONE
Labels: