You are viewing an old version of this page. View the current version.
Compare with Current ·
View Page History
What is a Channel Group
A channel group is any group of channels or lines coming into your organisation.
Adding a Channel Group
To add a Channel Group to the directory, simply select 'Channel Group' from the Organisation unit list and give it a name that represents its function e.g. Main ISDN 30 as shown below. Then click Add to put in to your directory.
There are no limits to the amount of channel groups you can add so you can set up all your ISDN, analogue, fax lines and private circuits exactly as they are on your switch. You simply select the Channel Group, give it a name and press add.
Your Channel Groups will appear in the Directory as follows:
Please note that a channel group on one site can be linked its counterpart on another site to provide on-net calls. To do this, click on the channel group and select properties. A screen similar to the following will appear:
Then click on the green add beside Remote end to drill down through directory until you find the channel group you would like to select for the 'B' end. Click on the green tick when you are ready to choose the 'B' end you would like to create the private circuit relationship with.
This channel group will then be added as the remote end as shown below and calls between sites will be treated as on-net calls, therby eliminating the call duplication often associated with inter site links.