Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version. Compare with Current ·  View Page History

These instructions help you configure your SwyxWare phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Connection Type
  TIM Enterprise establishes a DSN connection with this PBX.

Support Files
  SWYX V8.TDT
  SWYX V8.TDS
  SWYX V8.DBS
Required Tasks
  Configure the SMDR output
  Configure the DSN connection
  Configure TIM Plus

Configuring your SMDR output

By default, the Swyx telephone system writes its CDR data to a MSSQL database. In order for TIM Enterprise to connect to the database and collect the call logging data, you need to create a username and password in the MSSQL database on the Swyx  server. Contact your system maintainer if you are not familiar with this procedure.

The following information is required for TIM Enterprise to connect to the Swyx  database:

  • IP address or hostname of the  Swyx server where the MSSQL database resides.
  • Username and Password of the Swyx database.

The default credentials for the Swyx  database are shown below:

Username: Swyxcdr
Password: Swyxcdr

Setting up a DSN connection

To enable TIM Plus to work with your Skype for Business phone system, you first need to set up a DSN connection by following the steps below:

  1. Open Windows Control Panel and select the Administrative Tools icon

  2. Double-click on the Data Sources (ODBC) icon to open the ODBC Data Source Administrator window

     

    For a 64 bit system, access the ODBC Data Source Administrator from the following location C:\Windows\SysWOW64\odbcad32.exe

  3. Click on the System DSN tab.
  4. Click on the Add button.
  5. Select SQL Native Client from the driver list and click Finish.
  6. In the Name field, enter swyx.
  7. In the Description field, enter TIM Plus link to swyx.
  8. In the Server field, enter the IP address or hostname of your Swyx server.
  9. In the Username field, enter the username for your Swyx database.
  10. In the Password field, enter the password for your Swyx database.
  11. In the Database drop-down list, select swyx.
  12. Click on the Test button to confirm the information you entered is correct and that the connection is successful.
  13. Click on the OK button to close the window.


Labels: