Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version. Compare with Current ·  View Page History

These instructions help you configure your Siemens OpenOffice phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Connection Type
  TIM Plus establishes a TCP connection to this PBX.

Support Files
  Siemens OpenOffice.TDT
  Siemens OpenOffice.TDS
Required Tasks
  Configure the SMDR output
  Configure TIM Plus

Configure the SMDR output

Follow the steps below to enable your phone system to send the SMDR output via IP:

  1. Log in to the Siemens OpenOffice web portal.
  2. Click on Expert Mode and then select  Basic Settings
  3. Click on the Call Charges menu options.
  4. Click on Call Charges - Output Format and tick SMDR options shown below:

  5. Under CDR System options, change the Output Formatto LAN-TCP-Client
  6. In the TCP-Client field, enter the IP address of the PC running TIM Plus and a TCP port number to send the data.
  7. Click on the Apply tab to save the changes.

Configure TIM Plus

 

 

 

Labels: