Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version. Compare with Current ·  View Page History

These instructions help you configure your Aastra MX-ONE phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Connection Type
  TIM Plus listens for connections from this PBX.

Support Files
  Aastra MX-ONE - BC13.TDT
  Aastra MX-ONE - BC13.TDS
Required Tasks
  Configure the SMDR output
  Configure TIM Plus

Configuring your SMDR output

The MX-One phone system saves the call logging information into a local database, located by default in:


To edit the default path, SSH into each MX-One and use the mc command. You can use the mkdir (key 7) to configure the directory structure as required.

Next, you need to enter the following commands for the primary MX-One (the one that will send the data via IP to TIM Plus):

The server IP address specified above will be the IP address of the TIM Plus machine. The port number can be set to any free TCP port, but we would recommend one in the 9000 range.

Then, for the primary MX-One, add the following two commands to send the data:

For each additional MX-One in the cluster, the following commands need to be entered, applying lim 2, 3, 4...n accordingly.

 

 

Labels: