Siemens HiPath 4000

These instructions help you configure your Siemens HiPath 4000 phone system to work with TIM Enterprise. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Connection Type

  TIM Enterprise establishes a TCP connection to this PBX.

Support Files

  Siemens HiPath 4000.TDT
  Siemens HiPath 4000.TDS

Required Tasks

  Configure the SMDR output
  Configure TIM Enterprise

Configuring your SMDR output

By default, the SMDR output of a Siemens HiPath 4000 phone system is not enabled. For information about how to configure the output for incoming, outgoing and internal calls, contact your system maintainer.

Configuring TIM Enterprise

Follow the steps below to configure TIM Enterprise to collect the SMDR data from your Siemens HiPath 4000:

1. Click on the Directory tab.
2. Choose the PBX object you want to configure and click Properties.
3. A new window will open. In the General tab, select Siemens HiPath 4000 from the Data format list and tick the Keep a local backup of data box, as shown below:
   
   
4. In the Connection tab, select Establish TCP connection to PBX from the Connection method list.
5. In the Host field, enter the IP address of your Siemens HiPath 4000.
6. In the Port field, enter 9000.
7. Leave the Username and Password fields blank.
8. In the IP script field, select Generic Simple from the drop-down list.
9. Click on the Save button to apply the settings.