Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version. Compare with Current ·  View Page History

These instructions help you configure your Mitel 3100 phone system to work with TIM Enterprise. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Connection Type
  TIM Enterprise establishes a serial connection with this PBX.

Support Files
  Mitel 3100.TDT
Required Tasks
  Configure the SMDR output
  Install NetPBX
  Configure TIM Enterprise

Configuring your SMDR output

Follow the steps below to configure your Mitel 3100 to output SMDR data via a serial connection:

  1. Using an RS-232 cable, connect the PC running TIM Enterprise to the serial port of the Mitel 3100.
  2. Launch the Mitel System Tool.
  3. Choose Voice from the selection menu.
  4. Click on the Management tab, select Call Logging.
  5. Click Change to set the following parameters:
    • Set the Cost per minute to 00. (This functionality is not supported in NA systems)
    • Set the Minimum call duration to be recorded option to 00:00:00.
    • Set the Type of calls option to All
    • Set the Minimum page length to 1.
    • Enable call logging.
  6. Click Save and commit the changes.

Installing NetPBX

Install and configure NetPBX

Configuring TIM Enterprise

Once NetPBX is configured and collecting data, log in to TIM Enterprise and perform the following steps:

  1. Click on the Directory tab.
  2. Choose the PBX object you want to configure and click Properties.
  3. A new window will open. In the General tab, select Mitel 3100 from the Data format list and tick the Keep a local backup of data box, as shown below:

  4. In the Connection tab, select No connection required from the Connection method list.
  5. Click on the Save button to apply the settings.

 

Labels: