Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version. Compare with Current ·  View Page History

These instructions help you configure your VoiSpeed PBX phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Connection Type
  The SMDR data is outputted to a file

Support Files
  VoiSpeed.TDT
Required Tasks
  Configure the CDR output
  Install NetPBX
  Configure TIM Enterprise]

Configuring your CDR output

The VoiSpeed phone system outputs its CDR data to a file. To configure the output, contact your system maintainer.

TIM Plus can be installed on the same machine as the VoiSpeed server; however, you should confirm this first with your system maintainer as it may impact system performance.

Installing NetPBX

Since your VoiSpeed phone system outputs its call logging data to a file, you first need to install the NetPBX software in order to collect the contents of the call logging file and forward it to TIM Plus. For setup instructions, click on the link below:

Install and configure NetPBX

Configuring TIM Enterprise

Once NetPBX is configured and collecting data, log in to TIM Enterprise and perform the following steps:

  1. Click on the Directory tab.
  2. Choose the PBX object you want to configure and click Properties.
  3. A new window will open. In the General tab, select VoiSpeed from the Data format list and tick the Keep a local backup of data box, as shown below:

  4. In the Connection tab, select No connection required from the Connection method list.
  5. Click on the Save button to apply the settings.


     

 

 

These instructions should assist in configuring your VoiSpeed to work with TIM Enterprise. If you are not familiar with PBX configuration, please contact your system maintainer.

Connection information Description
Connection type File
IP method VoiSpeed - File output: The VoiSpeed will output the CDR information to a file. TIM Enterprise can be installed on the same machine as the VoiSpeed server, however we recommend that you speak to your system maintainer to see if there would be any problems in doing this.

You will need to install a copy of Tri-Line's IP PBX as the output file from the VoiSpeed is read only.

For your SMDR configuration, you will need to speak to your system maintainer to enable SMDR output.

Configuring TIM Enterprise

Below you will find steps on how to configure TIM Enterprise to listen for SMDR data from your VoiSpeed:

  1. Browse to TIM Enterprise as normal and login with your credentials.
  2. Click on the Directory tab.
  3. Go the the point in the Directory where you need to add the PBX Object and add a PBX with the name 'VoiSpeed'.
  4. Left-click on it and select Properties.
  5. From the General settings tab select VoiSpeed from the PBX model list.
  6. VoiSpeed
  7. In the Connection tab select No connection required from the Connection method list.
  8. Finally, click on the Save button.
  9. VoiSpeed
Labels: