Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version. Compare with Current ·  View Page History

These instructions help you configure your Toshiba Strata DK phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Connection Type
  TIM Enterprise establishes a serial connection with this PBX.

Support Files
  Toshiba Strata DK.TDT
  Toshiba Strata DK.TDS
Required Tasks
  Configure the SMDR output
  Install NetPBX
  Configure TIM Enterprise

Configuring your SMDR output

For more information about the output and configuration of your SMDR data, contact your system maintainer.

Installing NetPBX

To collect call logging data from the serial port and send it to TIM Plus, you first need to install the NetPBX software. For setup instructions, click on the link below:

Install and configure NetPBX

Configuring TIM Enterprise

Once NetPBX is configured and collecting data, log in to TIM Enterprise and perform the following steps:

  1. Click on the Directory tab.
  2. Choose the PBX object you want to configure and click Properties.
  3. A new window will open. In the General tab, select AGFEO AC-AS Series from the Data format list and tick the Keep a local backup of data box, as shown below:

  4. In the Connection tab, select No connection required from the Connection method list.
  5. Click on the Save button to apply the settings.

 

 

 

 

These instructions should assist in configuring your Toshiba Strata DK to work with TIM Enterprise. If you are not familiar with PBX configuration, please contact your system maintainer.

Connection information Description
Connection type Serial Output: The Toshiba Strata DK sends SMDR information via a serial connection, you will need to directly connect a serial cable from the Toshiba Strata DK PBX to the PC that NetPBX is installed and running on.
Cable configuration Null-modem/Crossover or Straight-through. Please check your Toshiba manual.

For your SMDR configuration, you will need to speak to your system maintainer to enable SMDR output.

Configuring TIM Enterprise

Below you will find steps on how to configure TIM Enterprise to listen for SMDR data from your Toshiba Strata DK:

  1. Browse to TIM Enterprise as normal and login with your credentials.
  2. Click on the Directory tab.
  3. Go the the point in the Directory where you need to add the PBX Object and add a PBX with the name 'Toshiba Strata DK'.
  4. Left-click on it and select Properties.
  5. From the General settings tab select Toshiba Strata DK from the PBX model list.
  6. Toshiba Strata DK
  7. In the Connection tab select No connection required from the Connection method list.
  8. Finally, click on the Save button.
  9. Toshiba Strata DK
Labels: