Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version. Compare with Current ·  View Page History

These instructions help you configure your Panasonic ICX/S-ICX phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Connection Type
  TIM Enterprise establishes a serial connection with this PBX.

Support Files
  Panasonic ICX.TDT
Required Tasks
  Configure the SMDR output
  Install NetPBX
  Configure TIM Enterprise

 

 

 

 

These instructions should assist in configuring your Panasonic ICX/S-ICX to work with TIM Enterprise. If you are not familiar with PBX configuration, please contact your system maintainer.

Connection information Description
Connection type Serial Output: Panasonic ICX/S-ICX sends SMDR information via a serial connection. You will need to directly connect a serial cable from the Panasonic ICX/S-ICX PBX to the PC that NetPBX is installed and running on.
Cable configuration Null-Modem/Crossover.

For your SMDR configuration, you will need to speak to your system maintainer to enable SMDR output.

Configuring TIM Enterprise

Below you will find steps on how to configure TIM Enterprise to listen for SMDR data from your Panasonic ICX/S-ICX:

  1. Browse to TIM Enterprise as normal and login with your credentials.
  2. Click on the Directory tab.
  3. Go the the point in the Directory where you need to add the PBX Object and add a PBX with the name 'Panasonic ICX/S-ICX'.
  4. Left-click on it and select Properties.
  5. From the General settings tab select Panasonic ICX/S-ICX from the PBX model list.
  6. Panasonic ICX/S-ICX
  7. In the Connection tab select No connection required from the Connection method list.
  8. Finally, click on the Save button.
  9. Panasonic ICX/S-ICX
Labels: