You are viewing an old version of this page. View the current version.
Compare with Current ·
View Page History
These instructions help you configure your Siemens Realitis/HiPath DX phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.
Connection Type
TIM Plus listens for connections from this PBX.
Support Files
Siemens HiPath DX.TDT
Siemens HiPath DX.TDS
Required Tasks
Configure the CIL output
Configure TIM Plus
Configuring your CIL output
CIL access over Ethernet
 | In addition to CIL access over V.24 ports, all Realitis DX and iSDX systems with firmware revision 6.0 and above can send their CIL information by Ethernet. The System/UPI card - ACI - only allows a maximum of three such connections; subsequent connection requests are rejected. To set up and activate this feature, a request must be made to Product Management at Siemens, Beeston. |
Connecting to the CIL server
TIM Plus establishes a TCP connection to the IP address of the System/UPI card of your Siemens phone system.
You can choose the IP address of the System/UPI card by setting the variable IPACT in the permanent database. Your local maintenance engineer should be able to program this address for you.
The default listening port is 17257.
Configuring TIM Plus
Follow the steps below to configure TIM Plus to listen for SMDR data from your Siemens Realitis/HiPath DX:
- Browse to TIM Plus as normal and log in with your credentials.
- Click on the tab.
- Select the site configured during the setup wizard and click .
- Within the Site Properties window, select Siemens HiPath DX from the PBX model drop-down list.
- In the Connection method field, select Actively connect to PBX from the drop-down list.
- Leave the Host field blank.
- In the Port field, enter in 17257.
- Click on the button to apply the settings.