LG iPECS - IP connection

These instructions help you configure your LG iPECS phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Connection Type

  TIM Plus listens for connections from this PBX.

Support Files

  LG iPECS.TDT
  LG.TDS

Required Tasks

  Configure the SMDR output
  Configure TIM Plus

Configuring your SMDR output

The LG iPECS by default has SMDR output disabled. Below you will find the programming number codes and the fields that need to be configured.

SMDR Attributes (PGM 177)

Within this window you need to set Info/On-line SMDR to Telnet 1. This will allow TIM Plus to connect to the LG iPECS on TCP port 23 to receive SMDR data.

Below is an example of the SMDR Attributes window:

Printer Port Selection (PGM 175)

Below is an example of the Programming Port Selection window:

Configuring TIM Plus

If your LG iPECS has been configured to send the data via TCP/IP, follow the steps below to configure TIM Plus:

1. Click on the Directory tab.
2. Select on the site configured during the setup wizard and click Properties.
   
   
3. Within the Site Properties window, select LG iPECS from the PBX model drop-down list.
4. In the Connection method field, select Listen for connections from PBX from the drop-down list.
5. In the Host field, enter in the IP address of your LG iPECS.
6. In the Port field, enter in 23.
7. Click on the Save button to apply the settings.