You are viewing an old version of this page. View the current version.
Compare with Current ·
View Page History
These instructions help you configure your NEC SV8100 phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.
Connection Type
TIM Plus establishes a TCP connection to this PBX.Support Files
NEC DXE.TDTNEC DXE.TDS
Required Tasks
Configure the SMDR outputConfigure TIM Plus
Configuring the SMDR output
Below you will find instructions on how to configure the SMDR output on the NEC SV8100:
External equioment LAN setup
SMDR otpions
SMDR port assignment for trunk groups
Trunk Basic setup
CD DP00 Network setup
Configuring TIM Plus
Below you will find steps on how to configure TIM Plus to connect to your NEC SV8100 phone system:
- Log on to TIM Plus as usual and click on the tab.
- Click on the site configured during the setup wizard and click
. - Within the Site Properties window, select NEC DXE from the PBX model drop-down list.
- In the Connection method field, select Actively connect to PBX from the drop-down list.
- In the Host field, enter the IP Address of your NEC SV8100.
- In the Port field, enter the port 60010.
- Leave the Username and Password fields blank.
- In the Connection script field, select Generic Simple from the drop-down list.
- Finally, click on the button to apply the settings.
Labels: