You are viewing an old version of this page. View the current version.
Compare with Current ·
View Page History
These instructions help you configure your VoiSpeed PBX phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.
Connection Type
The SMDR data is outputted to a file
Support Files
VoiSpeed.TDT
VoiSpeed.TDS
Required Tasks
Configure the SMDR output
Install NetPBX
Configure TM Plus
Configuring your CDR output
The VoiSpeed phone system outputs the CDR information to a file. To configure the output, please speak to your phone maintainer.
TIM Plus can be installed on the same machine as the VoiSpeed server, however we recommend that you first confirm this with the phone engineer.
Installing NetPBX
As the output file from VoiSpeed is read-only, you will first need to install the NetPBX software to be able to send the data to TIM Plus. For setup instructions, click on the link below:
Configuring TIM Plus
Once NetPBX is configured and collecting data, log on to TIM Plus as usual and apply the following settings:
- Click on the tab.
- Select the site configured during the setup wizard and click.
- Within the Site Properties window, select Toshiba CIX-CTX from the PBX model drop-down list.
- In the Connection method field, select No connections required from the drop-down list.
- Click on the button to apply the settings.
These instructions should assist in configuring your VoiSpeed to work with TIM Plus. If you are not familiar with PBX configuration, please contact your system maintainer.
| Connection information | Description |
|---|---|
| Connection type | File |
| IP method | VoiSpeed - File output:
The VoiSpeed will output the CDR information to a file. TIM Plus can be installed on the same machine as the VoiSpeed server, however we recommend that you speak to your system maintainer to see
if there would be any problems in doing this.
You will need to install a copy of Tri-Line's IP PBX as the output file from the VoiSpeed is read only. |
For your SMDR configuration, you will need to speak to your system maintainer to enable SMDR output.
Configuring TIM Plus
Below you will find steps on how to configure TIM Plus to listen for SMDR data from your VoiSpeed:
- Browse to TIM Plus as normal and login with your credentials.
- Click on the tab.
- Click on the site configured during the setup wizard and click or create a new site and click .
- Within the Site Properties window, select VoiSpeed from the PBX model drop-down list.
- In the Connection method field select No connection required from the drop-down list.
- Finally, click on the button.
