You are viewing an old version of this page. View the current version.
Compare with Current ·
View Page History
These instructions should assist in configuring your Samsung DCS to work with TIM Plus. If you are not familiar with PBX configuration, please contact your system maintainer.
Connection information | Description |
---|---|
Connection type | Serial Output:
The Samsung DCS sends SMDR information via a serial connection, you will need to directly connect a serial cable from the Samsung DCS PBX to the PC that NetPBX is installed and running on.
The Samsung DCS Compact requires a Miscellaneous card for SMDR output. |
Cable configuration | Straight-through. |
Configuring your SMDR
Below you will find instructions on how to configure your Samsung DCS to output SMDR to TIM Plus. You will need to do this from a LCD handset. Just use the down arrow key to move to each option.
- Open Programming and select .
- Program each option as stated below:
- Now press the key.
- Select .
- Dial 0 and use the arrow keys and select SMDR.
- Now press the key.
SMDR field | Value |
---|---|
Page Header | Yes |
Lines per page | 1 |
Incoming Call | Yes |
Outgoing Call | Yes |
Authorise Code | Yes |
SMDR Start Time | Yes |
In/Out Group | No |
DND Calls | No |
Wake-Up Calls | No |
Directory Names | None |
Caller ID Data | Yes |
Abandoned Call | Yes |
No of Dial Mask | 00 |
DID Num/Name | Yes |
Configuring TIM Plus
Below you will find steps on how to configure TIM Plus to listen for SMDR data from your Samsung DCS:
- Browse to TIM Plus as normal and login with your credentials.
- Click on the tab.
- Click on the site configured during the setup wizard and click or create a new site and click .
- Within the Site Properties window, select Samsung DCS from the PBX model drop-down list.
- In the Connection method field select No connection required from the drop-down list.
- Finally, click on the button.
Labels: