These instructions help you configure your Panasonic KX-TD Series phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.
Connection Type
TIM Plus establishes a serial connection with this PBX.Support Files
Panasonic KX Family.TDTPanasonic KX Family.TDS
Required Tasks
Configure the SMDR outputInstall NetPBX
Configure TIM Plus
Configuring your SMDR output
Below you will find instructions on how to configure your Panasonic KX-TD Series to output SMDR to TIM Plus. You will need to do this from one of the Digital Proprietary Telephone (DPT): KX-T7431, KX-T7433, KX-T7436, KX-T7230, KX-T7235:
- Press and enter your System Password.
- Enter 800 and press the button.
- You will now see Outgoing: Off, press the button until you see All. When you can see All press the button.
- Press the Incoming: Off. Press the button until you see All. When you can see All press the button. button and you should see
- Press the button, the programming is now complete.
Installing NetPBX
The Panasonic KX-TD Series phone system sends SMDR information via a serial connection. To collect the data from the serial port and send it to TIM Plus, you will first need to install the NetPBX software. For setup instructions, click on the link below:
Configuring TIM Plus
Once NetPBX is configured and collecting data, log on to TIM Plus as usual and apply the following settings:
- Click on the tab.
- Select the site configured during the setup wizard and click
. - Within the Site Properties window, select Panasonic KX Family from the PBX model drop-down list.
- In the Connection method field select No connection required from the drop-down list.
- Finally, click on the button to apply the settings.