You are viewing an old version of this page. View the current version.
Compare with Current ·
View Page History
These instructions should assist in configuring your Panasonic KX-TD Series to work with TIM Plus. If you are not familiar with PBX configuration, please contact your system maintainer.
Connection information | Description |
---|---|
Connection type | Serial Output: Panasonic KX-TD Series sends SMDR information via a serial connection. You will need to directly connect a serial cable from the Panasonic KX-TD PBX to the PC that NetPBX is installed and running on. |
Cable configuration | Null-Modem/Crossover. |
Configuring your SMDR
Below you will find instructions on how to configure your Panasonic KX-TD Series to output SMDR to TIM Plus. You will need to do this from one of the Digital Proprietary Telephone (DPT): KX-T7431, KX-T7433, KX-T7436, KX-T7230, KX-T7235:
- Press and enter your System Password.
- Enter 800 and press the button.
- You will now see Outgoing: Off, press the button until you see All. When you can see All press the button.
- Press the Incoming: Off. Press the button until you see All. When you can see All press the button. button and you should see
- Press the button, the programming is now complete.
Configuring TIM Plus
Below you will find steps on how to configure TIM Plus to listen for SMDR data from your Panasonic KX-TD 1232:
- Browse to TIM Plus as normal and login with your credentials.
- Click on the tab.
- Click on the site configured during the setup wizard and click or create a new site and click .
- Within the Site Properties window, select Panasonic KX Family from the PBX model drop-down list.
- In the Connection method field select No connection required from the drop-down list.
- Finally, click on the button.
Labels: