You are viewing an old version of this page. View the current version.
Compare with Current ·
View Page History
These instructions should assist in configuring your Panasonic KX-TA/E to work with TIM Plus. If you are not familiar with PBX configuration, please contact your system maintainer.
Connection information | Description |
---|---|
Connection type | Serial Output: Panasonic KX-TA/E PBX sends SMDR information via a serial connection. You will need to directly connect a serial cable from the Panasonic KX-TA/E PBX to the PC that NetPBX is installed and running on. |
Cable configuration | Null-Modem/Crossover. |
Configuring your SMDR
Below you will find instructions on how to configure your Panasonic KX-TA/E to output SMDR to TIM Plus. You will need to do this from the Panasonic KX-T7130 phone:
- On the back of the phone set it to Program.
- Press and then key and enter your system password.
- Press . You are now in Programming mode.
- Go to programming code 800, and set each of the settings as below. After you have set each one press and then to move to the next setting:
- Go to programming code 801, and set each of the settings as below. After you have set each one press and then to move to the next setting:
- Go to programming code 802, and set each of the settings as below. After you have set each one press and then to move to the next setting:
- On the back of the phone set it back to .
SMDR field | Value |
---|---|
NL-Code | CR+LF |
Baud Rate | 9600 |
Word Length | 8 bits |
Parity | None |
Stop Bit | 1 bit |
SMDR field | Value |
---|---|
Page Length | Leave as default |
Skip Perf | Leave as default |
SMDR field | Value |
---|---|
Outgoing | On |
Incoming | On |
Configuring TIM Plus
Below you will find steps on how to configure TIM Plus to listen for SMDR data from your Panasonic KX-TA/E:
- Browse to TIM Plus as normal and login with your credentials.
- Click on the tab.
- Click on the site configured during the setup wizard and click or create a new site and click .
- Within the Site Properties window, select Panasonic KX Family from the PBX model drop-down list.
- In the Connection method field select No connection required from the drop-down list.
- Finally, click on the button.
Labels: